The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a Power over Ethernet (PoE) connection over a RJ45 port.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve.Product features RAM-GDS-DOCK-D14-U1E:Only compatible with IntelliSkin & Uni-Conn adapterSnap-In functionEasy insertion and removalCharging functionOutput Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A / 12V @ 1.67APower Output: 24W maxTransfer Speed: 10/100MbpsInput Connector: JST Male ConnectorInput Cable Length: ca. 150 cmIncludes RAM PoE to PD Charging ModuleProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.85 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-D14-U1E is supplied.

The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a Power over Ethernet (PoE) connection over a RJ45 port.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.Product features RAM-GDS-DOCK-D14-U3E:Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads)Snap-In functionEasy insertion and removalCharging functionOutput Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A / 12V @ 1.67APower Output: 24W maxTransfer Speed: 10/100MbpsInput Connector: JST Male ConnectorInput Cable Length: ca. 150 cmIncludes RAM PoE to PD Charging ModuleProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.78 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-D14-U3E is supplied.

The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a Power over Ethernet (PoE) connection over a RJ45 port while the two USB-A ports on the back support up to two input devices like keyboard, mouse, scanner gun, and more.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.Product features RAM-GDS-DOCK-D14-U3E-2A:Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads)Snap-In functionEasy insertion and removalCharging functionOutput Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A / 12V @ 1.67APower Output: 24W maxTransfer Speed: 10/100MbpsInput Connector: JST Male Connector / 2x USB-A (Pheripheral)Input Cable Length: ca. 150 cmIncludes RAM PoE to PD Charging ModuleProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.83 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-D14-U3E-2A is supplied.

The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a Power over Ethernet (PoE) connection over a RJ45 port while the two USB-A ports on the back support up to two input devices like keyboard, mouse, scanner gun, and more.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.Product features RAM-GDS-DOCK-D14-U3E-2A-GRY:Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads)Snap-In functionEasy insertion and removalCharging functionOutput Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A / 12V @ 1.67APower Output: 24W maxTransfer Speed: 10/100MbpsInput Connector: JST Male Connector / 2x USB-A (Pheripheral)Input Cable Length: ca. 150 cmIncludes RAM PoE to PD Charging ModuleProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.74 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-D14-U3E-2A-GRY is supplied.

The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a Power over Ethernet (PoE) connection over a RJ45 port.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.Product features RAM-GDS-DOCK-D14-U3E-GRY:Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads)Snap-In functionEasy insertion and removalCharging functionOutput Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A / 12V @ 1.67APower Output: 24W maxTransfer Speed: 10/100MbpsInput Connector: JST Male ConnectorInput Cable Length: ca. 150 cmIncludes RAM PoE to PD Charging ModuleColour - light grayProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.69 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-D14-U3E-GRY is supplied.

The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve.Product features RAM-GDS-DOCK-D14-U1C:Only compatible with IntelliSkin & Uni-Conn adapterSnap-In functionEasy insertion and removalCharging functionOutput Voltage: 5-20V @ 3A maxPower Output: 60W maxInput Connector: USB-CInput Cable Length: ca. 150 cmIncludes 1m USB-C 2.0 cableProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.83 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-D14-U1C is supplied.

The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection while the two USB-A ports on the back support up to two input devices like keyboard, mouse, scanner gun, and more.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve.Product features RAM-GDS-DOCK-D14-U1C-2A:Only compatible with IntelliSkin & Uni-Conn adapterSnap-In functionEasy insertion and removalCharging functionOutput Voltage: 5-20V @ 3A maxPower Output: 60W maxInput Connector: USB-C / 2x USB-A (Pheripheral)Input Cable Length: ca. 150 cmIncludes 1m USB-C 2.0 cableProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.89 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-D14-U1C-2A is supplied.

The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection while the two USB-A ports on the back support up to two input devices like keyboard, mouse, scanner gun, and more.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve.Product features RAM-GDS-DOCK-D14-U1C-2A-GRY:Only compatible with IntelliSkin & Uni-Conn adapterSnap-In functionEasy insertion and removalCharging functionOutput Voltage: 5-20V @ 3A maxPower Output: 60W maxInput Connector: USB-C / 2x USB-A (Pheripheral)Input Cable Length: ca. 150 cmIncludes 1m USB-C 2.0 cableProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.89 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-D14-U1C-2A-GRY is supplied.

The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve.Product features RAM-GDS-DOCK-D14-U1C-GRY:Only compatible with IntelliSkin & Uni-Conn adapterSnap-In functionEasy insertion and removalCharging functionOutput Voltage: 5-20V @ 3A maxPower Output: 60W maxInput Connector: USB-CInput Cable Length: ca. 150 cmIncludes 1m USB-C 2.0 cableProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.83 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-D14-U1C-GRY is supplied.

The RAM Mounts GDS Uni-Conn docking station with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve.Product features RAM-GDS-DOCKLR-D14-U1C:Only compatible with IntelliSkin & Uni-Conn adapterSnap-In functionKey-LockingEasy insertion and removalCharging functionOutput Voltage: 5-20V @ 3A maxPower Output: 60W maxInput Connector: USB-CInput Cable Length: ca. 150 cmIncludes 1m USB-C 2.0 cableProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.84 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKLR-D14-U1C is supplied.

The RAM Mounts GDS Uni-Conn docking station with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection while the two USB-A ports on the back support up to two input devices like keyboard, mouse, scanner gun, and more.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve.Product features RAM-GDS-DOCKLR-D14-U1C-2A:Only compatible with IntelliSkin & Uni-Conn adapterSnap-In functionKey-LockingEasy insertion and removalCharging functionOutput Voltage: 5-20V @ 3A maxPower Output: 60W maxInput Connector: USB-C / 2x USB-A (Pheripheral)Input Cable Length: ca. 150 cmIncludes 1m USB-C 2.0 cableProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 3.02 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKLR-D14-U1C-2A is supplied.

The RAM Mounts GDS Uni-Conn docking station with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection while the two USB-A ports on the back support up to two input devices like keyboard, mouse, scanner gun, and more.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve.Product features RAM-GDS-DOCKLR-D14-U1C-2A-GRY:Only compatible with IntelliSkin & Uni-Conn adapterSnap-In functionKey-LockingEasy insertion and removalCharging functionOutput Voltage: 5-20V @ 3A maxPower Output: 60W maxInput Connector: USB-C / 2x USB-A (Pheripheral)Input Cable Length: ca. 150 cmIncludes 1m USB-C 2.0 cableProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 3.02 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKLR-D14-U1C-2A-GRY is supplied.

The RAM Mounts GDS Uni-Conn docking station with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve.Product features RAM-GDS-DOCKLR-D14-U1C-GRY:Only compatible with IntelliSkin & Uni-Conn adapterSnap-In functionKey-LockingEasy insertion and removalCharging functionOutput Voltage: 5-20V @ 3A maxPower Output: 60W maxInput Connector: USB-CInput Cable Length: ca. 150 cmProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.84 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKLR-D14-U1C-GRY is supplied.

The RAM Mounts GDS Uni-Conn docking station with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a Power over Ethernet (PoE) connection over a RJ45 port.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve.Product features RAM-GDS-DOCKLR-D14-U1E:Only compatible with IntelliSkin & Uni-Conn adapterSnap-In functionKey-LockingEasy insertion and removalCharging functionOutput Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A / 12V @ 1.67APower Output: 24W maxTransfer Speed: 10/100MbpsInput Connector: JST Male ConnectorInput Cable Length: ca. 150 cmIncludes RAM PoE to PD Charging ModuleProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.94 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKLR-D14-U1E is supplied.

The RAM Mounts GDS Uni-Conn docking station with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a Power over Ethernet (PoE) connection over a RJ45 port while the two USB-A ports on the back support up to two input devices like keyboard, mouse, scanner gun, and more.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve.Product features RAM-GDS-DOCKLR-D14-U1E-2A:Only compatible with IntelliSkin & Uni-Conn adapterSnap-In functionKey-LockingEasy insertion and removalCharging functionOutput Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A / 12V @ 1.67APower Output: 24W maxTransfer Speed: 10/100MbpsInput Connector: JST Male Connector / 2x USB-A (Pheripheral)Input Cable Length: ca. 150 cmIncludes RAM PoE to PD Charging ModuleProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 3.04 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKLR-D14-U1E-2A is supplied.

The RAM Mounts GDS Uni-Conn docking station with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a Power over Ethernet (PoE) connection over a RJ45 port while the two USB-A ports on the back support up to two input devices like keyboard, mouse, scanner gun, and more.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve.Product features RAM-GDS-DOCKLR-D14-U1E-2A-GRY:Only compatible with IntelliSkin & Uni-Conn adapterSnap-In functionKey-LockingEasy insertion and removalCharging functionOutput Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A / 12V @ 1.67APower Output: 24W maxTransfer Speed: 10/100MbpsInput Connector: JST Male Connector / 2x USB-A (Pheripheral)Input Cable Length: ca. 150 cmIncludes RAM PoE to PD Charging ModuleProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 3.04 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKLR-D14-U1E-2A-GRY is supplied.

The RAM Mounts GDS Uni-Conn docking station with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a Power over Ethernet (PoE) connection over a RJ45 port.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve.Product features RAM-GDS-DOCKLR-D14-U1E-GRY:Only compatible with IntelliSkin & Uni-Conn adapterSnap-In functionKey-LockingEasy insertion and removalCharging functionOutput Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A / 12V @ 1.67APower Output: 24W maxTransfer Speed: 10/100MbpsInput Connector: JST Male ConnectorInput Cable Length: ca. 150 cmIncludes RAM PoE to PD Charging ModuleProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.94 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKLR-D14-U1E-GRY is supplied.

The RAM Mounts GDS Uni-Conn docking station with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin Thin-Case protective sleeve and Rear Pogo Pads into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.Product features RAM-GDS-DOCKLR-D14-U3C:Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads)Snap-In functionKey-LockingEasy insertion and removalCharging functionOutput Voltage: 5V-20V @ 3A max (USB-C Tablets)Power Output: 60W maxInput Connector: USB-CInput Cable Length: ca. 150 cmIncludes USB-C 2.0 CableProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.74 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKLR-D14-U3C is supplied.

The RAM Mounts GDS Uni-Conn docking station with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection while the two USB-A ports on the back support up to two input devices like keyboard, mouse, scanner gun, and more.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin Thin-Case protective sleeve and Rear Pogo Pads into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.Product features RAM-GDS-DOCKLR-D14-U3C-2A:Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads)Snap-In functionKey-LockingEasy insertion and removalCharging functionOutput Voltage: 5V-20V @ 3A max (USB-C Tablets)Power Output: 60W maxInput Connector: USB-C / 2x USB-A (Pheripheral)Input Cable Length: ca. 150 cmIncludes USB-C 2.0 CableProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.74 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKLR-D14-U3C-2A is supplied.

The RAM Mounts GDS Uni-Conn docking station with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection while the two USB-A ports on the back support up to two input devices like keyboard, mouse, scanner gun, and more.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin Thin-Case protective sleeve and Rear Pogo Pads into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.Product features RAM-GDS-DOCKLR-D14-U3C-2A-GRY:Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads)Snap-In functionKey-LockingEasy insertion and removalCharging functionOutput Voltage: 5V-20V @ 3A max (USB-C Tablets)Power Output: 60W maxInput Connector: USB-C / 2x USB-A (Pheripheral)Input Cable Length: ca. 150 cmIncludes USB-C 2.0 CableProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.74 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKLR-D14-U3C-2A-GRY is supplied.

The RAM Mounts GDS Uni-Conn docking station with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin Thin-Case protective sleeve and Rear Pogo Pads into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.Product features RAM-GDS-DOCKLR-D14-U3C-GRY:Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads)Snap-In functionKey-LockingEasy insertion and removalCharging functionOutput Voltage: 5V-20V @ 3A max (USB-C Tablets)Power Output: 60W maxInput Connector: USB-CInput Cable Length: ca. 150 cmIncludes USB-C 2.0 CableProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.74 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKLR-D14-U3C-GRY is supplied.

The RAM Mounts GDS Uni-Conn docking station with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a Power over Ethernet (PoE) connection over a RJ45 port.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.Product features RAM-GDS-DOCKLR-D14-U3E:Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads)Snap-In functionKey-LockingEasy insertion and removalCharging functionOutput Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A / 12V @ 1.67APower Output: 24W maxTransfer Speed: 10/100MbpsInput Connector: JST Male ConnectorInput Cable Length: ca. 150 cmIncludes RAM PoE to PD Charging ModuleProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.88 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKLR-D14-U3E is supplied.

The RAM Mounts GDS Uni-Conn docking station with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a Power over Ethernet (PoE) connection over a RJ45 port while the two USB-A ports on the back support up to two input devices like keyboard, mouse, scanner gun, and more.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.Product features RAM-GDS-DOCKLR-D14-U3E-2A:Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads)Snap-In functionKey-LockingEasy insertion and removalCharging functionOutput Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A / 12V @ 1.67APower Output: 24W maxTransfer Speed: 10/100MbpsInput Connector: JST Male Connector / 2x USB-A (Pheripheral)Input Cable Length: ca. 150 cmIncludes RAM PoE to PD Charging ModuleProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.93 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKLR-D14-U3E-2A is supplied.

The RAM Mounts GDS Uni-Conn docking station with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a Power over Ethernet (PoE) connection over a RJ45 port while the two USB-A ports on the back support up to two input devices like keyboard, mouse, scanner gun, and more.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.Product features RAM-GDS-DOCKLR-D14-U3E-2A-GRY:Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads)Snap-In functionKey-LockingEasy insertion and removalCharging functionOutput Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A / 12V @ 1.67APower Output: 24W maxTransfer Speed: 10/100MbpsInput Connector: JST Male Connector / 2x USB-A (Pheripheral)Input Cable Length: ca. 150 cmIncludes RAM PoE to PD Charging ModuleProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.93 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKLR-D14-U3E-2A-GRY is supplied.

The RAM Mounts GDS Uni-Conn docking station with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a Power over Ethernet (PoE) connection over a RJ45 port.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.Product features RAM-GDS-DOCKLR-D14-U3E-GRY:Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads)Snap-In functionKey-LockingEasy insertion and removalCharging functionOutput Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A / 12V @ 1.67APower Output: 24W maxTransfer Speed: 10/100MbpsInput Connector: JST Male ConnectorInput Cable Length: ca. 150 cmIncludes RAM PoE to PD Charging ModuleProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.88 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKLR-D14-U3E-GRY is supplied.

The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a Power over Ethernet (PoE) connection over a RJ45 port while the two USB-A ports on the back support up to two input devices like keyboard, mouse, scanner gun, and more.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve.Product features RAM-GDS-DOCK-D14-U1E-2A:Only compatible with IntelliSkin & Uni-Conn adapterSnap-In functionEasy insertion and removalCharging functionOutput Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A / 12V @ 1.67APower Output: 24W maxTransfer Speed: 10/100MbpsInput Connector: JST Male Connector / 2x USB-A (Pheripheral)Input Cable Length: ca. 150 cmIncludes RAM PoE to PD Charging ModuleProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.95 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-D14-U1E-2A is supplied.

The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a Power over Ethernet (PoE) connection over a RJ45 port while the two USB-A ports on the back support up to two input devices like keyboard, mouse, scanner gun, and more.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve.Product features RAM-GDS-DOCK-D14-U1E-2A-GRY:Only compatible with IntelliSkin & Uni-Conn adapterSnap-In functionEasy insertion and removalCharging functionOutput Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A / 12V @ 1.67APower Output: 24W maxTransfer Speed: 10/100MbpsInput Connector: JST Male Connector / 2x USB-A (Pheripheral)Input Cable Length: ca. 150 cmIncludes RAM PoE to PD Charging ModuleProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.88 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-D14-U1E-2A-GRY is supplied.

The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a Power over Ethernet (PoE) connection over a RJ45 port.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve.Product features RAM-GDS-DOCK-D14-U1E-GRY:Only compatible with IntelliSkin & Uni-Conn adapterSnap-In functionEasy insertion and removalCharging functionOutput Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A / 12V @ 1.67APower Output: 24W maxTransfer Speed: 10/100MbpsInput Connector: JST Male ConnectorInput Cable Length: ca. 150 cmIncludes RAM PoE to PD Charging ModuleProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.85 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-D14-U1E-GRY is supplied.

The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin Thin-Case protective sleeve and Rear Pogo Pads into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.Product features RAM-GDS-DOCK-D14-U3C:Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads)Snap-In functionEasy insertion and removalCharging functionOutput Voltage: 5V-20V @ 3A max (USB-C Tablets)Power Output: 60W maxInput Connector: USB-CInput Cable Length: ca. 150 cmIncludes USB-C 2.0 CableProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.76 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-D14-U3C is supplied.

The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection while the two USB-A ports on the back support up to two input devices like keyboard, mouse, scanner gun, and more.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin Thin-Case protective sleeve and Rear Pogo Pads into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.Product features RAM-GDS-DOCK-D14-U3C-2A:Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads)Snap-In functionEasy insertion and removalCharging functionOutput Voltage: 5V-20V @ 3A max (USB-C Tablets)Power Output: 60W maxInput Connector: USB-C / 2x USB-A (Pheripheral)Input Cable Length: ca. 150 cmIncludes USB-C 2.0 CableProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.77 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-D14-U3C-2A is supplied.

The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection while the two USB-A ports on the back support up to two input devices like keyboard, mouse, scanner gun, and more.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin Thin-Case protective sleeve and Rear Pogo Pads into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.Product features RAM-GDS-DOCK-D14-U3C-2A-GRY:Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads)Snap-In functionEasy insertion and removalCharging functionOutput Voltage: 5V-20V @ 3A max (USB-C Tablets)Power Output: 60W maxInput Connector: USB-C / 2x USB-A (Pheripheral)Input Cable Length: ca. 150 cmIncludes USB-C 2.0 CableProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.67 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-D14-U3C-2A-GRY is supplied.

The RAM Mounts GDS Uni-Conn docking station is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads.This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more.The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection.The docking station features a weighted base and rubber pads that prevent it from sliding on surfaces.It also supports an easy docking and undocking process:Insert the tablet with the IntelliSkin Thin-Case protective sleeve and Rear Pogo Pads into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.Product features RAM-GDS-DOCK-D14-U3C-GRY:Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads)Snap-In functionEasy insertion and removalCharging functionOutput Voltage: 5V-20V @ 3A max (USB-C Tablets)Power Output: 60W maxInput Connector: USB-CInput Cable Length: ca. 150 cmIncludes USB-C 2.0 CableColour - light grayProduct Dimensions:Height from base to tilt bolt: 14.02 cm Base Width: 13.03 cm Base Depth: 16.84 cmWeight: approx. 2.67 kg Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-D14-U3C-GRY is supplied.