How-to

Calibrate the Zebra ZT231: auto and manual calibration

Set the label and sensor type, use auto calibration, and run the guided manual calibration when the ZT231 still skips labels.

10 min Difficulty: Easy Updated: By SCANSHOP team
In this guide

    Calibration sets the sensitivity of the ZT231's media and ribbon sensors and teaches the printer where each label starts. Without it, the printer may skip labels, let the print drift or stop with "Media Out" or "Ribbon Out" although supplies are loaded.

    When to calibrate

    • When you switch to labels or ribbon of a different size or type.
    • When the printer skips labels, or the print drifts up, down or sideways.
    • When the ribbon is not detected, either when it is loaded or when it runs out.
    • When gap or black mark labels are handled as if they were continuous.

    Know your labels

    Your labels Label Type Sensor Type
    Die-cut labels with gaps on a liner Gap/Notch Transmissive
    Tags with a notch or hole Gap/Notch Transmissive
    Labels with black marks on the back Mark Reflective
    Continuous labels without gaps Continuous Transmissive

    Set the label type under Print › Print Quality › Label Type and the sensor under Print › Sensors › Sensor Type. With continuous labels, the label length must come from your label format or driver.

    The ZT231 detects gaps of 2–4 mm (3 mm is ideal). Black marks must be 2.5–11.5 mm long, at least 9.5 mm wide and reach to within 1 mm of the inner edge of the liner, the edge nearest the back wall of the printer.

    Load labels and ribbon correctly

    Most calibration failures start with loading. The labels must run through the slot in the media sensor, under the inner media guide, and touch the back of the sensor slot. The outer media guide should touch the label edge. Ribbon must run as far back as it can under the printhead. Our ZT231 setup guide shows the full path.

    Use auto calibration

    The quickest way is to let the printer calibrate itself. The Print wizard (Wizards › Print › Start Print) does it as part of setup. To calibrate automatically every time:

    1. On the Home screen, touch System › Settings › Power Up Action or System › Settings › Head Close Action.
    2. Choose CALIBRATE. It adjusts the sensor levels, measures the label length and feeds to the start of the next label.
    3. Close the printhead or switch the printer on. It calibrates using about two to three labels.

    SHORT CAL is a faster option: it sets the thresholds and measures the label length without adjusting the sensor gain. Zebra also lists a button shortcut: hold PAUSE + FEED + CANCEL for 2 seconds to start a calibration.

    How to Auto Calibrate the ZT231 Printer

    Video: Zebra Technologies

    Run a manual calibration

    Use manual calibration when auto calibration fails or labels still skip. The touch display guides you step by step with pictures. Follow the prompts exactly, touch Next after each one, and hold CANCEL at any point to stop.

    1. With labels and ribbon loaded, touch Print › Sensors › Manual Calibration, then Start Calibration.
    2. Follow the prompts. They take you through opening the printhead, taking out the ribbon, peeling labels off the backing (liner) and placing the bare backing under the media sensor for the media calibration.
    3. For the ribbon sensor, reload the labels and the ribbon when asked and close the printhead assembly.
    4. When calibration is complete, press PAUSE to leave pause mode.
    How to Manually Calibrate the ZT231 Printer

    Video: Zebra Technologies

    Check the result

    Press FEED once: the printer should feed exactly one label. Then print a test label from your software and check that it lands on the label, not across the gap. If the gap does not stop on the tear bar, adjust Print › Image Adjust › Tear Line Offset (−120 to +120): lower values move the labels in, higher values out.

    Still unsure? Touch Print › Sensors › Print: Sensor Profile. On the printout, the spikes in the MEDIA line should be as far apart as the gaps or marks on your labels. If they are not, clean the sensors and calibrate again.

    Skipped or blank labels: fixes

    What you see Likely cause Fix
    Blank labels between printed ones, or labels skipped Printer not calibrated, or label format longer than the label Calibrate; check the label size in the driver or format
    Print drifts up or down from label to label Out of calibration, dirty platen roller, or gap labels set to Continuous Set Label Type, calibrate, clean the platen roller
    Gap labels handled as continuous Label Type set to Continuous, or not calibrated Set Gap/Notch or Mark, then calibrate
    "Media Out" with labels loaded Labels not through the sensor slot, or continuous media with Gap/Notch set Reload, set Label Type, calibrate
    Auto calibration fails Labels or ribbon loaded wrongly, sensors dirty or out of position, wrong Label Type Reload, blow dust off the sensors, check their position and Label Type, run a manual calibration

    For lights and display alerts, see ZT231 alerts and lights.

    Frequently asked questions

    How do I calibrate a Zebra ZT231?

    Touch Print › Sensors › Manual Calibration, then Start Calibration, and follow the screens. For automatic calibration, set Power Up Action or Head Close Action to CALIBRATE.

    Why does my ZT231 still skip labels after calibration?

    Check that Label Type matches your labels, that the label size in your driver or format matches the real label, and that the gaps are 2–4 mm. Then run a manual calibration.

    Do I need to calibrate after every new roll?

    Zebra recommends calibrating when you change to labels or ribbon of a different size or type. A new roll of the same labels normally needs no new calibration.

    What is the difference between CALIBRATE and SHORT CAL?

    CALIBRATE adjusts the sensor levels and thresholds and measures the label length. SHORT CAL only sets the thresholds and measures the length, without adjusting the sensor gain.

    Was this guide helpful?

    Used in this guide

    Compatible consumables and accessories for the ZT231.

    Compatible ribbons

    ProductWidth Length Type Ink sideCorePrice
    Zebra 5095 Resin Ribbon 40 mm × 450 m, Out, Black (05095BK04045) Zebra 5095 Resin Ribbon 40 mm × 450 m05095BK0404540 mm 450 m Resin Outside25.4 mm18,77 €+VATIn stock
    Zebra 5095 Resin Ribbon 60 mm × 300 m, Out, Black (05095BK06030) Zebra 5095 Resin Ribbon 60 mm × 300 m05095BK0603060 mm 300 m Resin Outside25.4 mm18,87 €+VATIn stock
    Zebra 4800 Resin Ribbon 80 mm × 450 m, Out, Black (04800BK08045) Zebra 4800 Resin Ribbon 80 mm × 450 m04800BK0804580 mm 450 m Resin Outside25.4 mm26,12 €+VATIn stock
    Zebra 5095 Resin Ribbon 83 mm × 300 m, Out, Black (05095BK08330) Zebra 5095 Resin Ribbon 83 mm × 300 m05095BK0833083 mm 300 m Resin Outside25.4 mm26,10 €+VATIn stock
    Zebra 5095 Resin Ribbon 89 mm × 450 m, Out, Black (05095BK08945) Zebra 5095 Resin Ribbon 89 mm × 450 m05095BK0894589 mm 450 m Resin Outside25.4 mm41,78 €+VATIn stock
    Zebra 2100 Wax Ribbon 102 mm × 450 m, Out, Black (02100BK10245) Zebra 2100 Wax Ribbon 102 mm × 450 m02100BK10245102 mm 450 m Wax Outside25.4 mm13,15 €+VATIn stock
    Zebra 2100 Wax Ribbon 106 mm × 450 m, Out, Black (02100BK10645) Zebra 2100 Wax Ribbon 106 mm × 450 m02100BK10645106 mm 450 m Wax Outside25.4 mm13,66 €+VATIn stock
    Zebra 5095 Resin Ribbon 110 mm × 300 m, Out, Black (05095BK11030) Zebra 5095 Resin Ribbon 110 mm × 300 m05095BK11030110 mm 300 m Resin Outside25.4 mm34,59 €+VATIn stock
    Zebra 4800 Resin Ribbon 40 mm × 450 m, Out, Black (04800BK04045) Zebra 4800 Resin Ribbon 40 mm × 450 m04800BK0404540 mm 450 m Resin Outside25.4 mm13,06 €+VATOut of stock View
    Zebra 5095 Resin Ribbon 60 mm × 450 m, Out, Black (05095BK06045) Zebra 5095 Resin Ribbon 60 mm × 450 m05095BK0604560 mm 450 m Resin Outside25.4 mm28,18 €+VATIn stock
    Zebra 3200 Wax/Resin Ribbon 80 mm × 450 m, Out, Black (03200BK08045) Zebra 3200 Wax/Resin Ribbon 80 mm × 450 m03200BK0804580 mm 450 m Wax/Resin Outside25.4 mm18,33 €+VATIn stock
    Zebra 5095 Resin Ribbon 83 mm × 450 m, Out, Black (05095BK08345) Zebra 5095 Resin Ribbon 83 mm × 450 m05095BK0834583 mm 450 m Resin Outside25.4 mm38,98 €+VATIn stock
    Zebra 2300 Wax Ribbon 89 mm × 450 m, Out, Black (02300BK08945) Zebra 2300 Wax Ribbon 89 mm × 450 m02300BK0894589 mm 450 m Wax Outside25.4 mm9,86 €+VATIn stock
    Zebra 2300 Wax Ribbon 102 mm × 450 m, Out, Black (02300BK10245) Zebra 2300 Wax Ribbon 102 mm × 450 m02300BK10245102 mm 450 m Wax Outside25.4 mm11,30 €+VATIn stock
    Zebra 5095 Resin Ribbon 110 mm × 450 m, Out, Black (05095BK11045) Zebra 5095 Resin Ribbon 110 mm × 450 m05095BK11045110 mm 450 m Resin Outside25.4 mm51,67 €+VATIn stock
    Zebra 4800 Resin Ribbon 60 mm × 450 m, Out, Black (04800BK06045) Zebra 4800 Resin Ribbon 60 mm × 450 m04800BK0604560 mm 450 m Resin Outside25.4 mm19,59 €+VATIn stock
    Zebra 2300 Wax Ribbon 83 mm × 300 m, Out, Black (02300BK08330) Zebra 2300 Wax Ribbon 83 mm × 300 m02300BK0833083 mm 300 m Wax Outside25.4 mm6,26 €+VATIn stock
    Zebra 3200 Wax/Resin Ribbon 89 mm × 450 m, Out, Black (03200BK08945) Zebra 3200 Wax/Resin Ribbon 89 mm × 450 m03200BK0894589 mm 450 m Wax/Resin Outside25.4 mm20,37 €+VATIn stock
    Zebra 4800 Resin Ribbon 110 mm × 450 m, Out, Black (04800BK11045) Zebra 4800 Resin Ribbon 110 mm × 450 m04800BK11045110 mm 450 m Resin Outside25.4 mm35,90 €+VATIn stock
    Zebra 2300 Wax Ribbon 60 mm × 300 m, Out, Black (02300BK06030) Zebra 2300 Wax Ribbon 60 mm × 300 m02300BK0603060 mm 300 m Wax Outside25.4 mm4,52 €+VATIn stock
    Zebra 2300 Wax Ribbon 83 mm × 450 m, Out, Black (02300BK08345) Zebra 2300 Wax Ribbon 83 mm × 450 m02300BK0834583 mm 450 m Wax Outside25.4 mm9,18 €+VATIn stock
    Zebra 2300 Wax Ribbon 110 mm × 300 m, Out, Black (02300BK11030) Zebra 2300 Wax Ribbon 110 mm × 300 m02300BK11030110 mm 300 m Wax Outside25.4 mm8,30 €+VATIn stock
    Zebra 2300 Wax Ribbon 60 mm × 450 m, Out, Black (02300BK06045) Zebra 2300 Wax Ribbon 60 mm × 450 m02300BK0604560 mm 450 m Wax Outside25.4 mm6,65 €+VATIn stock
    Zebra 3200 Wax/Resin Ribbon 83 mm × 300 m, Out, Black (03200BK08330) Zebra 3200 Wax/Resin Ribbon 83 mm × 300 m03200BK0833083 mm 300 m Wax/Resin Outside25.4 mm12,81 €+VATIn stock
    Zebra 2300 Wax Ribbon 110 mm × 300 m, Out, Black (02300GT11030) Zebra 2300 Wax Ribbon 110 mm × 300 m02300GT11030110 mm 300 m Wax Outside25.4 mm8,72 €+VATIn stock
    Zebra 3200 Wax/Resin Ribbon 60 mm × 300 m, Out, Black (03200BK06030) Zebra 3200 Wax/Resin Ribbon 60 mm × 300 m03200BK0603060 mm 300 m Wax/Resin Outside25.4 mm9,24 €+VATIn stock
    Zebra 3400 Wax/Resin Ribbon 83 mm × 450 m, Out, Black (03400BK08345) Zebra 3400 Wax/Resin Ribbon 83 mm × 450 m03400BK0834583 mm 450 m Wax/Resin Outside25.4 mm15,08 €+VATIn stock
    Zebra 2300 Wax Ribbon 110 mm × 450 m, Out, Black (02300BK11045) Zebra 2300 Wax Ribbon 110 mm × 450 m02300BK11045110 mm 450 m Wax Outside25.4 mm12,19 €+VATIn stock
    Zebra 3400 Wax/Resin Ribbon 60 mm × 450 m, Out, Black (03400BK06045) Zebra 3400 Wax/Resin Ribbon 60 mm × 450 m03400BK0604560 mm 450 m Wax/Resin Outside25.4 mm10,88 €+VATIn stock
    Zebra 2100 Wax Ribbon 110 mm × 450 m, Out, Black (02100BK11045) Zebra 2100 Wax Ribbon 110 mm × 450 m02100BK11045110 mm 450 m Wax Outside25.4 mm14,18 €+VATIn stock
    Zebra 3200 Wax/Resin Ribbon 60 mm × 450 m, Out, Black (03200BK06045) Zebra 3200 Wax/Resin Ribbon 60 mm × 450 m03200BK0604560 mm 450 m Wax/Resin Outside25.4 mm13,73 €+VATIn stock
    Zebra 1600 Wax Ribbon 110 mm × 450 m, Out, Black (01600BK11045) Zebra 1600 Wax Ribbon 110 mm × 450 m01600BK11045110 mm 450 m Wax Outside25.4 mm9,28 €+VATIn stock
    Zebra 3200 Wax/Resin Ribbon 110 mm × 300 m, Out, Black (03200BK11030) Zebra 3200 Wax/Resin Ribbon 110 mm × 300 m03200BK11030110 mm 300 m Wax/Resin Outside25.4 mm16,98 €+VATIn stock
    Zebra 3400 Wax/Resin Ribbon 110 mm × 450 m, Out, Black (03400BK11045) Zebra 3400 Wax/Resin Ribbon 110 mm × 450 m03400BK11045110 mm 450 m Wax/Resin Outside25.4 mm19,98 €+VATIn stock
    Zebra 3200 Wax/Resin Ribbon 110 mm × 450 m, Out, Black (03200BK11045) Zebra 3200 Wax/Resin Ribbon 110 mm × 450 m03200BK11045110 mm 450 m Wax/Resin Outside25.4 mm25,19 €+VATIn stock
    Zebra 5100 Resin Ribbon 40 mm × 450 m, Out, Black (05100BK04045) Zebra 5100 Resin Ribbon 40 mm × 450 m05100BK0404540 mm 450 m Resin Outside25.4 mm29,71 €+VATOut of stock View
    Zebra Image Lock Resin Ribbon 60 mm × 300 m, Out, Black (74776) Zebra Image Lock Resin Ribbon 60 mm × 300 m7477660 mm 300 m Resin Outside25.4 mm105,63 €+VATOut of stock View
    Zebra Image Lock Resin Ribbon 80 mm × 300 m, Out, Black (74777) Zebra Image Lock Resin Ribbon 80 mm × 300 m7477780 mm 300 m Resin Outside25.4 mm140,85 €+VATOut of stock View
    Zebra Resin Ribbon 83 mm × 450 m, Out, White (74702) Zebra Resin Ribbon 83 mm × 450 m7470283 mm 450 m Resin Outside25.4 mm143,02 €+VATOut of stock View
    Zebra 4800 Resin Ribbon 89 mm × 450 m, Out, Black (04800BK08945) Zebra 4800 Resin Ribbon 89 mm × 450 m04800BK0894589 mm 450 m Resin Outside25.4 mm29,06 €+VATOut of stock View
    Zebra 5319 Wax Ribbon 102 mm × 450 m, Out, Black (05319BK10245) Zebra 5319 Wax Ribbon 102 mm × 450 m05319BK10245102 mm 450 m Wax Outside25.4 mm22,97 €+VATOut of stock View
    Zebra Image Lock Resin Ribbon 110 mm × 300 m, Out, Black (74917) Zebra Image Lock Resin Ribbon 110 mm × 300 m74917110 mm 300 m Resin Outside25.4 mm193,66 €+VATOut of stock View
    Zebra 2300 Wax Ribbon 40 mm × 450 m, Out, Black (02300BK04045) Zebra 2300 Wax Ribbon 40 mm × 450 m02300BK0404540 mm 450 m Wax Outside25.4 mm4,42 €+VATOut of stock View
    Zebra 5100 Resin Ribbon 60 mm × 450 m, Out, Black (05100BK06045) Zebra 5100 Resin Ribbon 60 mm × 450 m05100BK0604560 mm 450 m Resin Outside25.4 mm44,56 €+VATOut of stock View
    Zebra 2100 Wax Ribbon 80 mm × 450 m, Out, Black (02100BK08045) Zebra 2100 Wax Ribbon 80 mm × 450 m02100BK0804580 mm 450 m Wax Outside25.4 mm10,32 €+VATOut of stock View
    Zebra 5100 Resin Ribbon 83 mm × 450 m, Out, Black (05100BK08345) Zebra 5100 Resin Ribbon 83 mm × 450 m05100BK0834583 mm 450 m Resin Outside25.4 mm61,82 €+VATOut of stock View
    Zebra 5100 Resin Ribbon 89 mm × 450 m, Out, Black (05100BK08945) Zebra 5100 Resin Ribbon 89 mm × 450 m05100BK0894589 mm 450 m Resin Outside25.4 mm66,09 €+VATOut of stock View
    Zebra 3200 Wax/Resin Ribbon 102 mm × 450 m, Out, Black (03200BK10245) Zebra 3200 Wax/Resin Ribbon 102 mm × 450 m03200BK10245102 mm 450 m Wax/Resin Outside25.4 mm23,35 €+VATOut of stock View
    Zebra 5100 Resin Ribbon 110 mm × 450 m, Out, Black (05100BK11045) Zebra 5100 Resin Ribbon 110 mm × 450 m05100BK11045110 mm 450 m Resin Outside25.4 mm81,70 €+VATOut of stock View
    Zebra 2100 Wax Ribbon 40 mm × 450 m, Out, Black (02100BK04045) Zebra 2100 Wax Ribbon 40 mm × 450 m02100BK0404540 mm 450 m Wax Outside25.4 mm5,17 €+VATOut of stock View
    Zebra Resin Ribbon 60 mm × 450 m, Out, White (74736) Zebra Resin Ribbon 60 mm × 450 m7473660 mm 450 m Resin Outside25.4 mm86,16 €+VATOut of stock View
    Zebra 1600 Wax Ribbon 83 mm × 450 m, Out, Black (01600BK08345) Zebra 1600 Wax Ribbon 83 mm × 450 m01600BK0834583 mm 450 m Wax Outside25.4 mm7,00 €+VATOut of stock View
    Zebra 5319 Wax Ribbon 89 mm × 450 m, Out, Black (05319BK08945) Zebra 5319 Wax Ribbon 89 mm × 450 m05319BK0894589 mm 450 m Wax Outside25.4 mm20,02 €+VATOut of stock View
    Zebra 3400 Wax/Resin Ribbon 102 mm × 450 m, Out, Black (03400BK10245) Zebra 3400 Wax/Resin Ribbon 102 mm × 450 m03400BK10245102 mm 450 m Wax/Resin Outside25.4 mm18,51 €+VATOut of stock View
    Zebra Resin Ribbon 110 mm × 450 m, Out, White (74912) Zebra Resin Ribbon 110 mm × 450 m74912110 mm 450 m Resin Outside25.4 mm189,53 €+VATOut of stock View
    Zebra 3200 Wax/Resin Ribbon 40 mm × 450 m, Out, Black (03200BK04045) Zebra 3200 Wax/Resin Ribbon 40 mm × 450 m03200BK0404540 mm 450 m Wax/Resin Outside25.4 mm9,17 €+VATIn stock
    Zebra 1600 Wax Ribbon 60 mm × 450 m, Out, Black (01600BK06045) Zebra 1600 Wax Ribbon 60 mm × 450 m01600BK0604560 mm 450 m Wax Outside25.4 mm5,05 €+VATOut of stock View
    Zebra 5319 Wax Ribbon 83 mm × 450 m, Out, Black (05319BK08345) Zebra 5319 Wax Ribbon 83 mm × 450 m05319BK0834583 mm 450 m Wax Outside25.4 mm18,68 €+VATOut of stock View
    Zebra 2100 Wax Ribbon 89 mm × 450 m, Out, Black (02100BK08945) Zebra 2100 Wax Ribbon 89 mm × 450 m02100BK0894589 mm 450 m Wax Outside25.4 mm11,49 €+VATOut of stock View
    Zebra 5319 Wax Ribbon 110 mm × 300 m, Out, Gold (05319GD11030) Zebra 5319 Wax Ribbon 110 mm × 300 m05319GD11030110 mm 300 m Wax Outside25.4 mm74,66 €+VATOut of stock View

    Compatible labels

    ProductSize (W × H) Material Labels / rollCorePrice
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 101.6 mm, H: 63.5 mm, D: 127 mm, C: 25.4 mm (3007206-T) Zebra Z-Select 2000T3007206-T101.6 × 63.5 mm Normal Paper 110025.4 mm16,48 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 50.8 mm, H: 25.4 mm, D: 127 mm, C: 25.4 mm (3007201-T) Zebra Z-Select 2000T3007201-T50.8 × 25.4 mm Normal Paper 258025.4 mm9,21 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 57.15 mm, H: 31.75 mm, D: 127 mm, C: 25.4 mm (3006318) Zebra Z-Select 2000T300631857.15 × 31.75 mm Normal Paper 210025.4 mm10,74 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 69.85 mm, H: 31.75 mm, D: 127 mm, C: 25.4 mm (3007205-T) Zebra Z-Select 2000T3007205-T69.85 × 31.75 mm Normal Paper 210025.4 mm12,47 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Perform 1000T, W: 38.1 mm, H: 25.4 mm, D: 127 mm, C: 25.4 mm (880003-025D) Zebra Z-Perform 1000T880003-025D38.1 × 25.4 mm Normal Paper 258025.4 mm7,99 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 76.2 mm, H: 50.8 mm, D: 127 mm, C: 25.4 mm (800273-205) Zebra Z-Select 2000T800273-20576.2 × 50.8 mm Normal Paper 137025.4 mm12,57 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 31 mm, H: 22 mm, D: 127 mm, C: 25.4 mm (3007200-T) Zebra Z-Select 2000T3007200-T31 × 22 mm Normal Paper 289025.4 mm7,07 €+VATIn stock
    Labels, Zebra, Synthetic, Z-Ultimate 3000T, W: 76.2 mm, H: 50.8 mm, D: 127 mm, C: 25.4 mm (880255-050D) Zebra Z-Ultimate 3000T880255-050D76.2 × 50.8 mm Synthetic 137025.4 mm61,73 €+VATIn stock
    Labels, Zebra, Synthetic, Z-Ultimate 3000T, W: 101.6 mm, H: 50.8 mm, D: 127 mm, C: 25.4 mm (880261-050D) Zebra Z-Ultimate 3000T880261-050D101.6 × 50.8 mm Synthetic 137025.4 mm69,36 €+VATIn stock
    Labels, Zebra, Synthetic, Z-Ultimate 3000T White, W: 38.1 mm, H: 12.7 mm, D: 127 mm, C: 25.4 mm (880243-012D) Zebra Z-Ultimate 3000T White880243-012D38.1 × 12.7 mm Synthetic 465025.4 mm36,06 €+VATIn stock
    Labels, Zebra, Synthetic, Z-Ultimate 3000T, W: 50.8 mm, H: 25.4 mm, D: 127 mm, C: 25.4 mm (880247-025D) Zebra Z-Ultimate 3000T880247-025D50.8 × 25.4 mm Synthetic 258025.4 mm44,37 €+VATIn stock
    Labels, Zebra, Synthetic, Z-Ultimate 3000T, W: 69.85 mm, H: 31.75 mm, D: 127 mm, C: 25.4 mm (880253-031D) Zebra Z-Ultimate 3000T880253-031D69.85 × 31.75 mm Synthetic 210025.4 mm53,75 €+VATIn stock
    Labels, Zebra, Synthetic, Z-Ultimate 3000T, W: 57.15 mm, H: 31.75 mm, D: 127 mm, C: 25.4 mm (880249-031D) Zebra Z-Ultimate 3000T880249-031D57.15 × 31.75 mm Synthetic 210025.4 mm47,74 €+VATIn stock
    Labels, Zebra, Synthetic, 8100T CryoCool, W: 30 mm, H: 15 mm, D: 127 mm, C: 25.4 mm (3017014) Zebra 8100T CryoCool301701430 × 15 mm Synthetic 443025.4 mm75,35 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 101.6 mm, H: 50.8 mm, D: 127 mm, C: 25.4 mm (800274-205) Zebra Z-Select 2000T800274-205101.6 × 50.8 mm Normal Paper 137025.4 mm16,48 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Perform 1000T, W: 69.85 mm, H: 38.1 mm, D: 127 mm, C: 25.4 mm (880013-038D) Zebra Z-Perform 1000T880013-038D69.85 × 38.1 mm Normal Paper 179025.4 mm11,14 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Perform 1000T, W: 50.8 mm, H: 25.4 mm, D: 127 mm, C: 25.4 mm (880007-025D) Zebra Z-Perform 1000T880007-025D50.8 × 25.4 mm Normal Paper 258025.4 mm8,54 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 57.15 mm, H: 50.8 mm, D: 127 mm, C: 25.4 mm (3007202-T) Zebra Z-Select 2000T3007202-T57.15 × 50.8 mm Normal Paper 137025.4 mm10,00 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 31.75 mm, H: 25.4 mm, D: 127 mm, C: 25.4 mm (800271-105) Zebra Z-Select 2000T800271-10531.75 × 25.4 mm Normal Paper 258025.4 mm7,07 €+VATIn stock
    Labels, Zebra, Synthetic, PolyPro 3000T Gloss, W: 101.6 mm, H: 152.4 mm, D: 127 mm, C: 25.4 mm (3012964) Zebra PolyPro 3000T Gloss3012964101.6 × 152.4 mm Synthetic 53325.4 mm37,37 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 76.2 mm, H: 25.4 mm, D: 127 mm, C: 25.4 mm (800273-105) Zebra Z-Select 2000T800273-10576.2 × 25.4 mm Normal Paper 258025.4 mm13,09 €+VATIn stock
    Labels, Zebra, Synthetic, Z-Ultimate 3000T Silver, W: 50.8 mm, H: 25.4 mm, D: 127 mm, C: 25.4 mm (880269-025D) Zebra Z-Ultimate 3000T Silver880269-025D50.8 × 25.4 mm Synthetic 258025.4 mm46,55 €+VATIn stock
    Labels, Zebra, Synthetic, Z-Ultimate 3000T Silver, W: 38.1 mm, H: 19.05 mm, D: 127 mm, C: 25.4 mm (3006493) Zebra Z-Ultimate 3000T Silver300649338.1 × 19.05 mm Synthetic 372025.4 mm39,06 €+VATIn stock
    Labels, Zebra, Synthetic, Z-Ultimate 3000T Silver, W: 69.85 mm, H: 31.75 mm, D: 127 mm, C: 25.4 mm (3006628) Zebra Z-Ultimate 3000T Silver300662869.85 × 31.75 mm Synthetic 237025.4 mm63,01 €+VATIn stock
    Labels, Zebra, Synthetic, Z-Ultimate 3000T, W: 76.2 mm, H: 25.4 mm, D: 127 mm, C: 25.4 mm (880255-025D) Zebra Z-Ultimate 3000T880255-025D76.2 × 25.4 mm Synthetic 258025.4 mm61,71 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Perform 1000T, W: 40 mm, H: 50 mm, D: 127 mm, C: 25.4 mm (3002109) Zebra Z-Perform 1000T300210940 × 50 mm Normal Paper 148025.4 mm15,15 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 101.6 mm, H: 152.4 mm, D: 127 mm, C: 25.4 mm (3006322) Zebra Z-Select 2000T3006322101.6 × 152.4 mm Normal Paper 47525.4 mm16,48 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 57.15 mm, H: 19.05 mm, D: 127 mm, C: 25.4 mm (800272-075) Zebra Z-Select 2000T800272-07557.15 × 19.05 mm Normal Paper 331525.4 mm10,32 €+VATIn stock
    Labels, Zebra, Synthetic, Z-Ultimate 3000T, W: 101.6 mm, H: 76.2 mm, D: 127 mm, C: 25.4 mm (880261-076D) Zebra Z-Ultimate 3000T880261-076D101.6 × 76.2 mm Synthetic 93025.4 mm69,36 €+VATOut of stock View
    Labels, Zebra, Synthetic, Z-Ultimate 3000T White, W: 50.8 mm, H: 31.75 mm, D: 127 mm, C: 25.4 mm (880247-031D) Zebra Z-Ultimate 3000T White880247-031D50.8 × 31.75 mm Synthetic 210025.4 mm47,26 €+VATIn stock

    More ZT231 guides

    ZT231 ComparisonZebra ZT231 vs ZT411: which 4-inch industrial printer?5 min · Easy ZT231 TroubleshootingZebra ZT231 alerts and lights: causes and fixes10 min · Easy ZT231 SetupZebra ZT231 setup guide: from unboxing to first label30 min · Medium
    Still stuck?

    Send us your model and a short description of the problem. Our team will help you find a solution.

    Contact support
    Zebra ZT231 Label Printer (ZT23142-T0E000FZ)568,23 €+VAT View product