

RAM Mounts Safe-T-Charge Battery Protection System (RAM-234-VCP1U) sits between the vehicle battery and the electronics you have wired in – tablet docks, routers, GPS units or telematics boxes. It switches them off when the ignition goes off or when battery voltage sinks too low to start the engine, so a dock left charging overnight cannot leave the van dead in the morning. A delay of up to 8 hours keeps devices running after the engine stops, long enough for overnight software updates or remote access.
Safe-T-Charge is part of RAM's locking Uni-Conn vehicle kit for Samsung Tab Active5; order it on its own to add the same protection to docks that are already installed.
Key Features
- Two ways to trigger shut-off – follows the ignition (IGN) signal, or watches the battery and cuts the output when voltage drops below a level that can still start the engine
- Delay you choose – on-board DIP switches set the cut-off from instant up to 8 hours after the ignition is turned off
- Warning before power goes – a tone sounds five minutes before the timer runs out and repeats every minute until the output switches off
- Override when it matters – a switch on the unit bypasses the timed shut-off for emergencies or jobs that need power at once
- Protected input – surge, reverse-polarity and 24 V jump-start protection; rated at 30 A
- Rugged housing – high-strength composite with a waterproof design, about 0.20 kg
In fleet vehicles
Fleet IT teams often push updates to tablets and telematics units after the shift. Set the Safe-T-Charge to hold power for a fixed time after ignition-off, and it shuts the output down when that time is up – or earlier, if the battery falls below a safe starting voltage. A tone counts down the last five minutes, and a driver who needs power straight away can use the override switch.
Compatibility
- Vehicles, machines and boats with a 12 V battery (Battery + 12 V input terminal)
- Hardwired accessories such as tablet docks, chargers, routers, GPS and telematics units
- Commercial fleets, material-handling equipment and off-grid setups
Technical Specifications
| Part Number | RAM-234-VCP1U |
|---|---|
| Function | Accessory power cut-off by ignition signal or low battery voltage |
| Terminals | Battery + 12 V input, output, ground, IGN; override switch |
| Shut-off Delay | Instant to 8 hours after ignition off, set with DIP switches |
| Certifications | 30 A rating; 24 V jump-start protection |
| Materials | High-strength composite |
| Weight | 0.20 kg (0.43 lb) |
| In the Box | Safe-T-Charge module |
Rolling out hardwired tablets across a van fleet and worried about flat batteries? As an Official RAM Mounts Reseller we help specify docks, chargers and battery protection per vehicle and quote fleet pricing.
Questions about RAM-234-VCP1U
Can devices stay powered after the engine is off?
Yes. Choose a delay of up to 8 hours with the DIP switches; the output then switches off when the time runs out, or sooner if the battery voltage drops too low to start the engine.
What if a driver needs power after the cut-off?
The override switch bypasses the timed shut-off, so the connected devices get power again straight away.
How much current can it handle?
The unit is rated at 30 A and is protected against surges, reverse polarity and 24 V jump starts.
Recently Viewed
Don't forget! The products that you viewed. Add it to cart now.
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.