

RAM Mounts Tab-Tite Backplate with Fixed Mounting Screws (RAM-HOL-ACNU) takes the spring-loaded Tab-Tite plate and lets you lock its adjustment with two screws. Once tightened, the end cups no longer slide open, so the tablet cannot be pulled out quickly – the point when a device should stay in the vehicle or the machine shakes hard. RAM builds its Tab-Tite holder for John Deere on this plate.
📦 What's in the box – RAM-HOL-ACNU
- Tab-Tite backplate – spring-loaded, composite, AMPS 4-hole
- Fixing screws – 2× #4-40 x 3/8" machine screws, 2× #6 fender washers
- Sheet metal screws – 10× #4 x 3/8"
- AMPS hardware – 4× #8-32 x 5/8" machine screws, 4× #8-32 nyloc nuts
💡 Add a B-size or C-size round plate for the AMPS back and a B-size arm or C-size arm to finish the mount.
Key Features
- Locks the spring setting – two nuts in the slots on the back and two Phillips screws fix the plate at the tablet's width
- Made for vibration – suits machines and vehicles where a spring holder would not stay tight
- More than 40 cup sets – works with Tab-Tite end cups for many tablets, with or without a case
- Charging option – accepts GDS end cups that charge the tablet while it is held
- AMPS 4-hole back – 30 × 38 mm (1.181" × 1.496"); 0.20 kg (0.45 lb), composite
On tractors and work vehicles
Heavy vibration on farm machinery and work trucks can work a spring-loaded holder loose. With the screws set, this plate holds its width, and the low-profile build keeps the tablet close to its mount. It accepts Tab-Tite end cups and GDS end cups, so a tablet can also be charged while held.
Compatibility
- RAM Tab-Tite end cups (over 40 sets) and GDS end cups
- RAM ball bases and plates with the AMPS 4-hole 30 × 38 mm pattern
Technical Specifications
| Part Number | RAM-HOL-ACNU |
|---|---|
| Hole Pattern | AMPS 4-hole, 30 × 38 mm (1.181" × 1.496") |
| Hardware Included | 2× #4-40 x 3/8" machine screws; 2× #6 fender washers; 10× #4 x 3/8" sheet metal screws; 4× #8-32 x 5/8" machine screws; 4× #8-32 nyloc nuts |
| Materials | High-strength composite |
| Weight | 0.20 kg (0.45 lb) |
| In the Box | Tab-Tite backplate, fixing screws and washers, mounting hardware |
Mounting tablets on tractors, harvesters or site vehicles? As an Official RAM Mounts Reseller we can specify the plate, cups and base for each machine.
Complete RAM mounts with this part (1)
Every complete mount below includes this part.
Questions about RAM-HOL-ACNU
How is RAM-HOL-ACNU different from RAM-HOL-ACU?
Both are Tab-Tite backplates. RAM-HOL-ACNU adds two #4-40 Phillips screws with washers that fix the spring adjustment, so the tablet stays clamped.
Can I still change tablets later?
Yes. Loosen the fixing screws and fit different end cups – RAM offers more than 40 sets.
Can the tablet charge in it?
With GDS end cups, yes. The plate itself has no power connection.
Recently Viewed
Don't forget! The products that you viewed. Add it to cart now.
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.
