

What's in the box – RAP-B-404-238U
RAM Mounts Tough-Claw Mount with Composite Diamond Plate (RAP-B-404-238U) ends in a small plate rather than a ball, ready to screw onto a cradle. The plate carries the 2-hole AMPS pattern (48.6 mm) used by many RAM and third-party cradles, so a GPS, radio or phone holder you already own can go on any handlebar or rail sized from 1" to 1.6". Every part – claw, arm and plate – is high-strength composite.
For a holder that already has a ball, the claw with arm only is the simpler choice. Need a longer reach? Swap the arm for a long B-size arm.
Key Features
- Ready for 2-hole AMPS – holes 48.6 mm (1.912") apart – the pattern on the back of many RAM and third-party cradles
- All composite – claw, medium arm and diamond plate are high-strength composite, so nothing rusts
- Hand-tightened claw – fits round, square and irregular bars 25.4–40.6 mm (1"–1.6")
- Adjust at both ends – the 76 mm (3") arm has a ball joint at the claw and at the plate
- Load rating – 0.9 kg (2 lb) standard, 0.45 kg (1 lb) heavy-duty
In the cockpit
RAM lists aircraft among the vehicles for this mount, and the claw fits yoke tubes in its range without tools. Screw your cradle to the diamond plate on the ground, then clamp it on before the flight. Check your aircraft's and authority's rules for fitted equipment and keep the controls free.
Compatibility
- Cradles and holders with the 2-hole AMPS pattern (48.6 mm / 1.912")
- Bars, rails and tubes 25.4–40.6 mm (1"–1.6") outer diameter
- Motorcycles, ATVs, side-by-sides and aircraft listed by RAM
Technical Specifications
| Part Number | RAP-B-404-238U |
|---|---|
| Kit Contents | RAP-B-404U medium Tough-Claw base, RAP-B-201U composite medium arm, RAP-B-238U composite diamond ball base |
| Clamp Range | 25.4–40.6 mm (1"–1.6") outer diameter |
| Ball Size | B, 25.4 mm (1") |
| Arm | Medium, 76 mm (3") socket to socket |
| Hole Pattern | 2-hole AMPS, 48.6 mm (1.912") |
| Load Capacity | 0.9 kg (2 lb) standard use; 0.45 kg (1 lb) heavy-duty use |
| Materials | High-strength composite |
| Mounting Type | Rail and bar clamp, tool-free |
| Weight | 0.40 kg (0.88 lb) |
| In the Box | Medium Tough-Claw base with ball, composite double socket arm, composite diamond plate |
Moving existing cradles from old mounts onto rail clamps across a fleet of quads or aircraft? As an Official RAM Mounts Reseller we can work out the parts list with you and price it as one order.
Complete RAM mounts with this part (1)
Every complete mount below includes this part.
Questions about RAP-B-404-238U
Which cradles can I screw to the plate?
Any cradle with the 2-hole AMPS pattern, holes 48.6 mm (1.912") apart. Many RAM holders and third-party cradles use it.
Are screws for the cradle included?
No hardware is listed for this kit. Use screws that suit your cradle's mounting holes.
How does it differ from RAP-B-404-201U?
RAP-B-404-201U ends in an open socket for holders with a ball. RAP-B-404-238U adds the diamond plate, so it takes cradles with a flat 2-hole AMPS back instead.
Recently Viewed
Don't forget! The products that you viewed. Add it to cart now.
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.



