

What's in the box – RAM-108-BU
RAM Mounts Trolling Motor Stabilizer, Short (RAM-108-BU) holds a trolling motor shaft steady so it does not bounce and shake against its mount. A strap hose clamp wraps around the shaft, a round base screws to the boat, and a 63.5 mm (2.5") C-size arm links them. Overall it stands 175 mm (6.875") tall – the version for shafts that sit close to the mounting surface.
Shaft sits higher? The long kit RAM-108-DU uses a 203 mm arm, or swap in the medium C-size arm here. A spare strap hose clamp base is sold on its own.
Key Features
- Stops the shaft bouncing – locking the shaft to the boat takes vibration out of the motor and protects head, shaft and mount
- Fits common shaft sizes – the strap closes around diameters from 25.4 to 53.3 mm (1"–2.1"); #20 and #28 worm-drive clamps are included
- Protects the finish – a 152 mm (6") rubber strip goes under the strap to cushion vibration and prevent scratches
- Low and compact – short 63.5 mm (2.5") arm, 175 mm (6.875") overall height
- Marine-grade aluminium – base, arm and plate are aluminium for use on the water
Compatibility
- Trolling motor shafts and round tubes 25.4–53.3 mm (1"–2.1") in diameter
- Decks and flat surfaces where the round base can be screwed down
- Other RAM C-size (38.1 mm / 1.5") arms if you need a different length
Technical Specifications
| Part Number | RAM-108-BU |
|---|---|
| Kit Contents | RAM-108BU strap hose clamp base, RAM-201U-B short arm, RAM-202U round base |
| Clamp Range | 25.4–53.3 mm (1"–2.1") diameter |
| Ball Size | C, 38.1 mm (1.5") |
| Arm | Short, 63.5 mm (2.5") socket to socket |
| Base | Ø 63.5 mm (2.5") round plate; AMPS 4-hole 30 × 38 mm; 3-hole 120° Ø 46 mm |
| Overall Height | 175 mm (6.875") |
| Hardware | #20 and #28 worm-drive strap clamps, 152 mm (6") rubber strip |
| Materials | Marine-grade aluminium |
| Mounting Type | Drill-down base; strap clamp on the shaft |
| Weight | 0.52 kg (1.15 lb) |
| In the Box | Strap hose clamp base, short double socket arm, round base, 2 worm-drive clamps, rubber strip |
Preparing a rental fleet of fishing boats, or several boats before delivery? As an Official RAM Mounts Reseller we supply stabilizers in quantity and quote per order.
Questions about RAM-108-BU
What shaft diameter does RAM-108-BU fit?
The strap clamp covers 25.4–53.3 mm (1"–2.1"). Two worm-drive clamps, a #20 and a #28, come in the box.
Short or long stabilizer – which do I need?
Measure from the mounting surface to the point on the shaft where the strap will sit. This short kit is 175 mm (6.875") tall overall; the long RAM-108-DU reaches 318 mm (12.5").
Does the base have to be screwed down?
Yes, the round base is a drill-down plate. Only the clamp end attaches without screws, by tightening the hose clamp around the shaft.
Recently Viewed
Don't forget! The products that you viewed. Add it to cart now.
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.


