

RAM Mounts Vertical Drill-Down Vehicle Base (RAM-VB-181) is for cabs where there is no usable seat bolt but there is an upright panel. It bolts through a flat vertical face – an engine cover, the side of a RAM console box or the dog house between the seats of a fire engine – and carries a RAM pole system above it. Backing plates spread the load behind thin panels.
📦 What's in the box – RAM-VB-181
- Vertical drill-down base – powder-coated steel, 190.5 mm (7.5") tall and 70.1 mm (2.76") wide
- Backing plates – 2 pieces, fitted behind the panel
- Through-bolts – 4× 1/4"-20 × 1" hex bolts with 4× hex nuts, 8× flat washers and 4× lock washers
- Small screws – 2× #10-24 × 3/4" machine screws, 2× #10 fender washers, 1× 1/4"-20 × 3/4" machine screw
💡 Prefer a finished set? RAM-VB-181-SW1 and RAM-VB-181-SW3 add a pole, swing arms and a laptop tray to this base, and RAM-VB-181-WEST1 ends in a VESA 75 plate.
Key Features
- Uses upright panels – fixes to a flat vertical surface instead of the floor or seat rails
- Load spread behind the panel – two backing plates sit on the far side so the bolts do not pull through
- Compact footprint – 190.5 mm (7.5") high and 70.1 mm (2.76") wide
- Complete fixing kit – 1/4"-20 through-bolts, nuts, flat and lock washers plus #10-24 screws are in the box
- Steel construction – powder-coated steel for engine bays, consoles and fire apparatus cabs
Compatibility
- Any vehicle with a flat vertical surface: engine covers, fire engine dog houses, RAM console boxes
- RAM pole systems as used in RAM-VB-181-SW1, RAM-VB-181-SW3 and RAM-VB-181-WEST1
Technical Specifications
| Part Number | RAM-VB-181 |
|---|---|
| Mounting Type | Drill-down, flat vertical surface |
| Dimensions | Height 190.5 mm (7.5"); width 70.1 mm (2.76") |
| Materials | Powder-coated steel |
| Weight | 0.92 kg (2.02 lb) |
| In the Box | Vertical base, 2 backing plates, 1/4"-20 bolts, nuts and washers, #10-24 screws and fender washers |
Planning a fit-out for fire apparatus or service trucks with consoles? We are an Official RAM Mounts Reseller and can source the base, poles and trays for each vehicle in one order.
Complete RAM mounts with this part (3)
Every complete mount below includes this part.
Vertical Drill-Down Laptop Mount with Tough-Tray and Swing Arms, C-Size
359,95 € +VATOut of stock
Vertical Drill-Down Laptop Mount with Tough-Tray III and Swing Arms, C-Size
415,64 € +VATOut of stock
Vertical Drill-Down Mount with 12" Swing Arm and VESA 75 Plate, C-Size, Long Arm
391,00 € +VATOut of stock
Questions about RAM-VB-181
Where can RAM-VB-181 be installed?
On a flat vertical surface inside the vehicle, for example an engine cover, a fire engine dog house or the side of a RAM console box. It is drilled and through-bolted.
What holds it from behind?
Two backing plates are included. They go on the far side of the panel with the 1/4"-20 bolts, nuts and washers from the box.
Does it include a pole or a tray?
No, this is the base only. The RAM-VB-181-SW1 and -SW3 kits add a pole, swing arms and a laptop tray.
Recently Viewed
Don't forget! The products that you viewed. Add it to cart now.
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.