

What's in the box – RAM-B-166-UN11U
RAM Mounts X-Grip Large Tablet Suction Mount for 12–13" Devices (RAM-B-166-UN11U) is the kit for the biggest screens in the family: iPad Pro 12.9" and 13", iPad Air 13", Microsoft Surface Pro and Samsung's Galaxy Tab Ultra models. The cradle spans 184.2–222.2 mm and has a bottom keeper, and the whole assembly sits on one Twist-Lock suction cup. Before ordering, weigh tablet and case against the kit's 0.9 kg standard rating.
For a permanent installation, fit the 12–13" X-Grip holder to a B-size round plate screwed to the panel. Smaller tablets go in the 9–11" X-Grip kit.
Key Features
- Made for 12–13" tablets – width 184.2–222.2 mm (7.25"–8.75"), depth up to 22.2 mm (0.875"), height up to 260.3 mm (10.25") with the optional supports
- Bottom keeper – supports the tablet from below while the X-shaped arms hold the sides
- Quick removal – grip knobs on the back of the cradle release the device
- Twist-Lock suction cup – Ø 83.8 mm (3.3"), for glass and smooth, non-porous plastic
- Rated load – 0.9 kg (2 lb) standard and 0.45 kg (1 lb) heavy-duty use – check your tablet with its case
Large screens in the cockpit
On an aircraft windshield, confirm with the aircraft's and the authority's rules where equipment may go. For heavy convertibles or rough conditions, a screw-down base gives a firmer hold than suction.
Compatibility
- Tablets 184.2–222.2 mm (7.25"–8.75") wide and up to 22.2 mm (0.875") deep, with case; height up to 260.3 mm (10.25") with optional supports
- Apple (listed by RAM): iPad Pro 12.9" 1st–6th Gen, iPad Pro 13" (M4 & M5), iPad Air 13" (M2, M3, M4)
- Microsoft Surface Pro 5, 6, 7, 8, 9 and Pro X; HP Elite X2 1012 G1, G2; Dell Latitude 7320
- Samsung Galaxy Tab S8 Ultra, S9 Ultra, S10 Ultra, S11 Ultra, S10 FE+, Galaxy Book 12", Galaxy TabPro S; Zebra XSLATE R12
Technical Specifications
| Part Number | RAM-B-166-UN11U |
|---|---|
| Kit Contents | RAM-HOL-UN11U X-Grip holder for 12–13" tablets, RAM-B-202U round plate, RAM-B-201U arm, RAM-B-224-1U Twist-Lock suction cup base |
| Device Size | Width 184.2–222.2 mm (7.25"–8.75"); depth up to 22.2 mm (0.875"); height up to 260.3 mm (10.25") with optional supports |
| Ball Size | B, 25.4 mm (1") |
| Arm | Medium, 76 mm (3") socket to socket |
| Suction Cup | Twist-Lock, Ø 83.8 mm (3.3") |
| Load Capacity | 0.9 kg (2 lb) standard use; 0.45 kg (1 lb) heavy-duty use |
| Materials | Marine-grade aluminium, high-strength composite |
| Mounting Type | Suction cup |
| Weight | 0.80 kg (1.77 lb) |
| In the Box | X-Grip holder for 12–13" tablets, round plate, double socket arm, Twist-Lock suction cup base, assembly hardware, optional tether, glue tube for rubber caps |
Equipping instructors or inspectors with 12.9" iPads or Surface Pros? As an Official RAM Mounts Reseller we advise on suction versus screw-down bases and quote for the whole group.
Questions about RAM-B-166-UN11U
Does a Microsoft Surface Pro fit?
RAM lists Surface Pro 5, 6, 7, 8, 9 and Pro X. The device must be 184.2–222.2 mm wide and no more than 22.2 mm deep, including any case.
Is one suction cup enough for a 13" tablet?
RAM rates the kit at 0.9 kg (2 lb) for standard and 0.45 kg (1 lb) for heavy-duty use. Weigh the tablet with its case; if it comes close, or the vehicle sees rough terrain, choose a screw-down base.
Does the iPad Air 13" fit?
Yes, RAM lists the iPad Air 13" with M2, M3 and M4 chips as well as the iPad Pro 12.9" and 13".
Recently Viewed
Don't forget! The products that you viewed. Add it to cart now.
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.

